589885LUCAS – Indicator Switch –
589885LUCAS – Indicator Switch –
Indicator, Horn and Headlamp Dip Switch – steering column stalk for LHD applications, mounted on the right-hand side of the…
Indicator, Horn and Headlamp Dip Switch – steering column stalk for LHD applications, mounted on the right-hand side of the…
Headlamp Pigtail connector lead for the front lighting circuit. The pigtail plugs onto the rear of the headlamp unit and…
Distributor Cap for the Lucas 25D4 distributor. This is the early acorn-nut type: the HT leads screw into threaded terminals…
Distributor O-Ring, the sealing ring for the ignition distributor on the 3.5L V8 petrol engine. The O-ring seals the distributor…
Starter Pinion Retaining Kit for the inertia (Bendix) drive of the starter motor fitted to 4-cylinder and 6-cylinder petrol engines.…
Starter Bush Kit – the set of bronze bushes that support the armature shaft of the inertia-type starter motor (Lucas…
Cold Start Solenoid for the carburettor cold-start enrichment circuit on the V8 petrol carburettor induction system. The solenoid operates the…
Transmitter oil temperature for gauge with 140C dial scale
Bolt with a 1/4″ UNF (Unified Fine) thread. A threaded steel fastener used to secure body panels and ancillary fittings.
Ignition Coil for the V8 petrol ignition system. It converts the low-voltage supply into the high-tension voltage that fires the…
Ignition Coil for the V8 petrol ignition system. It converts the low-voltage supply into the high-tension voltage that fires the…
Heater Control Bulb illuminates the heater and ventilation control panel. Fitted into the front HVAC control assembly, it backlights the…
Festoon Bulb – 12V 21W is a double-ended festoon-type incandescent bulb rated at 12V 21W, fitted with contacts at both…
Hazard Switch – the push-type dashboard switch that operates the hazard warning function. When pushed it flashes all four indicator…
Lens RH
Brush set M418G