NT407041L – Transfer Box Lever Lock Nut –
NT407041L – Transfer Box Lever Lock Nut –
Transfer Box Lever Lock Nut used to secure the selector linkage at the transfer case. This half nut (thin profile…
Transfer Box Lever Lock Nut used to secure the selector linkage at the transfer case. This half nut (thin profile…
Nyloc Nut with a 3/8″ UNF thread and a 12 mm across-flats hex, in the full-height (thick) form. A nylon…
Gearchange Roll Pin – a tension (roll) pin used in the manual gearchange mechanism to secure the gear lever to…
Clevis Pin for the differential lock selector linkage in the LT230 transfer gearbox. This clevis pin secures the selector lever…
Speedometer Cable is the lower section of the speedometer drive line. This flexible drive cable transmits the rotation taken from…
Speedo cable
Split Pin – a 1.5mm x 12mm cotter pin used to lock a slotted (castle) nut or to retain a…
Split Pin used throughout the chassis, steering and driveline assemblies as a positive locking fastener. The pin is passed through…
Hub retaining nut
Mainshaft 5th Speed Gear for the LT77 and LT77S 5-speed manual gearbox. This gear is mounted on the mainshaft assembly…
ATF – Dexron III is an automatic transmission fluid meeting the Dexron III specification, supplied in a 5 litre container.…
Layshaft Bearing for the Series manual gearbox. It supports the layshaft (countershaft) within the gearbox casing, allowing the constant-mesh gear…
Detent Spring for the manual gearbox gear selector mechanism. The spring loads the detent ball against the selector shaft, holding…
Spring ring
Washer Thrust 3rd Gear
Mainshaft Peg is a locating peg fitted to the mainshaft of the LT67 gearbox. It positions and retains its associated…