FRC6284 – Thrust Washer and Pin 3.55mm LT95 –
FRC6284 – Thrust Washer and Pin 3.55mm LT95 –
Thrust Washer and Pin for the LT95 four-speed gearbox, 3.55mm thickness. This selective-thickness washer, with its locating pin, sets the…
Thrust Washer and Pin for the LT95 four-speed gearbox, 3.55mm thickness. This selective-thickness washer, with its locating pin, sets the…
Thrust Washer for the LT95 four-speed gearbox, 3.75mm thickness. This selective-thickness washer sets the end-float of the intermediate gear.
Gearchange Spring for the LT77 five-speed manual gearbox, fitted within the gearchange and lever assembly. The spring acts on the…
O-Ring – LT95 Gearbox seals the transfer shaft on the LT95 4-speed gearbox, which carries an integral transfer case, preventing…
Transfer Box Inspection Cover – inspection plate for the transfer gearbox. Fitted over the inspection aperture in the transfer box…
Shim – 1.20 mm front axle hub shim. Fitted in the front axle hub assembly to set the correct spacing…
Outer Shim – 1.35mm – Front Halfshaft / CV Joint This 1.35mm shim is used to set the end-float of…
Grommet
Retaining Plate – gearchange grommet retaining plate for the transfer box. Secures the transfer box gearchange grommet where the gear…
Synchro Hub is part of the synchromesh assembly in the LT76 gearbox, splined to the mainshaft and carrying the sliding…
Joint Washer seals the gearchange/inspection cover against the transfer box casing within the transfer gearbox assembly. Fitted between the cover…
Drain Plug Washer is the copper sealing washer for the drain plug on the LT77 manual gearbox. It seats between…
Transfer Case Bottom Cover Gasket for the LT95 combined gearbox and transfer case. It seals the joint between the bottom…
Gear Lever Grommet for the 5-speed manual gearchange assembly. It seals around the gear lever where it passes through the…
Mainshaft Nut Staked retaining nut securing the shaft assembly within the manual gearbox. Tightened and staked to lock the gearbox…
Torsion Spring for the gear lever mechanism of the LT77 and R380 five-speed manual gearboxes. Fitted within the gearchange housing,…