247614 – Rocker Shaft Bush –
247614 – Rocker Shaft Bush –
Rocker Shaft Bush in the cylinder head valvetrain. The bush is pressed into a rocker pedestal and provides the bearing…
Rocker Shaft Bush in the cylinder head valvetrain. The bush is pressed into a rocker pedestal and provides the bearing…
Lock Washer secures a threaded fastener against loosening under vibration and thermal cycling. Fitted beneath the nut or bolt head,…
Rocker Bush for the rocker shaft assembly in the Defender’s 2.5L diesel engine. Fitted to the rocker shaft to support…
Lock Washer for the starting dog at the front of the crankshaft. The starting dog threads into the nose of…
Water Pump Gasket sealing the water pump to the engine in the cooling circuit. The 8-hole gasket matches the bolt…
Lock Nut with a 5/16″ BSF thread. The lock nut secures a threaded fastening against loosening under vibration, maintaining clamp…
Nyloc Nut with a 1/2″ BSF thread. A nylon insert in the crown of the nut grips the bolt thread…
Engine Stud for the Rover V8 petrol engine, measuring 5/16″ x 2-1/8″ with a UNC/UNF dual thread form. The coarse…
Stud A threaded fastening stud catalogued for use across multiple applications. It is fitted in several locations on the engine…
Bolt – 5/16″ UNF x 5/8″ is a general-purpose hexagon-head set bolt in 5/16 UNF (Unified National Fine) thread, 5/8…
Bolt – 1/2 UNF x 1 is a hexagon-head set bolt in 1/2 UNF (Unified National Fine) thread, 1 inch…
Bolt with a 7/16″ UNF thread, used as a fastener on the Rover V8 petrol engine.
Sealing Ring A rubber O-ring sealing ring serving two separate shaft and tube interfaces. It is used on the transfer…
Spring – Timing Ratchet sits within the engine timing assembly on Land Rover 2.25L and 2.0L diesel engines. This spring…
Rocker Cover Gasket sealing the inlet rocker cover to the cylinder head on the 2.0L petrol IOE (Inlet Over Exhaust)…
Engine Mounting Bracket – right-hand front engine mount angle adaptor. Bolts to the right-hand side of the cylinder block and…