AEU1523 – Rear Lamp Gasket –
AEU1523 – Rear Lamp Gasket –
Rear Lamp Gasket for the rear lamp assembly. The gasket seals the joint between the rear lamp body and the…
Rear Lamp Gasket for the rear lamp assembly. The gasket seals the joint between the rear lamp body and the…
Rear Window Catch Assembly, right-hand, for the side-opening rear window in the rear body. This catch latches the hinged rear…
Stud Plate Retainer is part of the rear end door latch mechanism. The stud plate provides the fixed engagement point…
Tub Floor Reinforcement Crossmember is a structural member in the rear body, supporting the load floor of the rear tub.…
Seal Retainer for the rear (3rd/5th) door aperture at the tailboard. The retainer is a profiled strip that clamps the…
Loadspace Mat Retainer for the rear door aperture at the tailboard. The retainer is a profiled strip that clamps the…
Reinforcement is a structural stiffener for the lower rear body. It fits to the lower section of the rear body…
Countersunk Bolt for the rear side door lower hinge. It fastens the lower hinge and secures the lower pivot point…
Caged Nut – a captive plastic nut that receives a self-tapping or trim screw. It clips into a panel aperture…
Tilt Stud for the soft top (tilt) and hood frame fixing. Mounts to the body to receive the retaining plate…
Spring Plate that retains the soft top (tilt) hood frame. Works with the tilt stud to clamp the canopy in…
Blanking Plug for closing a 1-5/8″ hole in bodywork or panels. Seals an unused aperture or grommet hole in body…
Insulation Pad Clip A fir-tree style retaining clip that holds the under-bonnet sound-deadening and heat insulation pad in place. The…
G-Hook – a hook fitting for the soft top drain channel. It anchors and tensions the drain channel that runs…
Bonnet Striker Pin – the pin the bonnet latch engages to hold the bonnet closed. It mounts to the bonnet…
Nut Plate for the body-side striker mountings, part of the door and tailboard latch assembly. The plate provides captive threaded…